Please refer to the attached white paper.

Please refer to the attached how-to.

Data replication: In data replication, the destination share is available all the time - however, it should be used only for backup purposes...

In order to connect to the same target with multiple initiators at the same time, a cluster filesystem has to be used. Otherwise, the data may...

Creating and using Snapshots in Open-E A snapshot is used to freeze the data contents of a volume at a certain time. This is useful in the case...

The default size for VMalloc is 128. Your other choices are 256 and 384. We usually recommend setting the size to 384.  Most system will...

1.  Go to the GUI:   CONFIGURATION -> NAS settings -> NFS settings and enable the "Use NFS" option, which  allows...

In older DSS versions, the problem of losing the ACL configuration after an update can occur. The solution is to save your ACL configuration....

Yes, Open-E software is compatible with Virtual Iron. We are also certified for VI version 4.3. Please refer to the attached document for an example...

Symptom:  I am trying to create volume replication and I cannot see the destination volume. Problem: I have my primary volume...