iSCSI SAN Storage Area Network Servers NAS Network Attached Storage Data Storage Solution

Open-E NAS Network Attached Storage, iSCSI SAN Storage Area Network

Service & Support > Product Compatibility > Tape Drives

Tape Drive Models	iSCSI	NAS-XSR	iSCSI-R3	NAS-R3	DSS
ADR-50	-		-
ADR2-60 - IDE/ATAPI 30/60GB per tape	-		-
ADR2-60 - SCSI 30/60GB per tape	-		-
ADR2-60 - USB 30/60GB per tape	-		-
ADR2-120 - IDE/ATAPI 60/120GB per tape	-		-
ADR2-120 - SCSI 60/120GB per tape	-		-
Certance DAT72	-		-
Certance STT3401A	-		-
Compaq EOD003	-		-
Exabyte VXA-1a	-		-
OnStream ADR 2	-		-
SONY AIT3	-		-
SONY SDX-420C	-		-
Tandberg SLR60	-		-
Tandberg TS400	-		-

Notice 1: The list contains only tape drives certified by Open-E. Non-listed tape drives may be supported also. If you are running a non-listed tape driver, please contact us at : support@open-e.com

Notice 2: Tape drives are supported in Enterprise product line only.

Product Compatibility

The following information is intended to assist you in choosing the appropriate hardware to use with the Open-E NAS software. This list only includes RAID controllers, Motherboards and Network Cards which were successfully tested. Hardware which is not included on this list is considered to be incompatible, and they do not work with the Open-E NAS software.

We recommend you to contact one of our authorized partners to get more information on hardware compatibility.

Backup Agents

Certified Systems

Fibre Channel HBA
(initiator mode)

Fibre Channel HBA
(target mode)

HDD controller
(hardware RAID)

HDD controller
(software RAID)

iSCSI initiator

LCD

Motherboard

Network Card

Network Card - 10Gbit

Network Card - Infiniband