Open-E DSS V6 iSCSI-Failover and MPIO with ESXi 5,0

in Other by

  • Setup the Open-E DSS V6 iSCSI Targets on both the Source and Destination
  • Configure the Open-E DSS V6 Auto Failover service
  • Enter the Virtual IP Addresses on both the Source and Destination
  • Connect the ESXi 5.0 via its initiator to the Open-E DSS V6 Virtual IP Addresses
  • Configure the MPIO settings on ESXi 5.0

Share this video

Give us your feedback