Webinars List

• Configure the Fiber Channel HBA for Target Mode with the Qlogic
• Create the Fiber Channel
• Setup the Alias and WWN for the Fiber Channel HBA
• Assign the Alias to the Fiber Channel Group
• Verify the Fiber Channel connection with VMware
• Setup the Multipath in VMware

• Setup your Router use the WAN Volume Replication ports
• Create the iSCSI volumes on both Source and Destination
• Setup the Mirrored IP Addresses on both Source and Destination
• Enter the WAN Replication ID on both Source and Destination
• Create the Volume Replication Task and set the Bandwidth
• Start the Volume Replication Task and verify the volumes are consistent

• Stop the Auto Failover service on the Primary and Secondary
• Stop and Delete the Volume Replication Tasks on the Primary
• Disable the Replication feature for the Volume in the Volume Manger
• Add the additional capacity to the iSCSI Volume and add the Replication
• Create the Volume Replication Task for the Source Volume to the Destination
• Start the Auto Failover service

• How to configure DSS V6 iSCSI-Failover for MPIO
• Static vs. Dynamic iSCSI Targets discovery in ESXI 4.1
• How to configure MPIO with ESXI 4.1
• MPIO tuning in ESXI 4.1
• MPIO benchmark with IOmeter using Windows 2008 Virtual Machine

• Setup the NIC and DNS and Gateway
• Setup a NAS Logical Volume
• Enable the Antivirus Service
• Update the Antivirus updates
• Create the Antivirus Tasks

• setup a NAS Logical Volume to store the Microsoft data
• create a NAS Share from the NAS Logical Volume
• access the Console Tools from the Console Screen
• perform the data migration from the "Add-ons" tool
• set the Access rights for the users

• How to configure snapshots for data replications
• How to configure data replication in LAN, WAN and within single system
• Data Replication deployment with one-to-one, one-to-many and many-to-one

• What the Open-E DSS V6 API function can do for you
• Enabling the API function with the Open-E DSS V6
• Stage the OpenSSH for Windows (other applications will work)
• Demonstrate how to create Volumes, Users and more with the API

• Performance testing - setting up the NIC's for both DSS V6 systems
• Installing the NIC test small update upd_0574-DSS_V6.upd
• Test NIC's from Console Tools in Add-ins section
• Setting up the Volumes to be used with DSS V6
• Installing the Volume test small update "upd_0524-DSS_V6.upd"
• Performing Read and Write test from Console Tools in Add-ons section.

• How to plan and create snapshots for typical administrator needs
• How to use NAS and iSCSI snapshots and to control snapshots remotely
• How to plan and configure data replication for data redundancy

Watch this webcast for further information.