#1 Software for Data Storage, Backup & Business Continuity
Webinars & videos
Welcome to our webinar and tutorial section. Here you'll find everything from how Active-Active clusters work to why the ZFS system is so spectacular, all presented via video. If you find something that piques your interest; just click on the video and let our experienced experts explain said topic.
Browse webinars
in Other
- Introduction: Adaptec MaxCache
- Introduction: STEC SSD
- Overview of the Open-E DSS V6 with Adaptec maxCache and STEC SSD
- Demo: Setup of iSCSI Volumes on DSS V6
- Demo: Comparison benchmarking of RAID array with and without SSD Cache
- Setup the proper NICs for Bonding (if using Jumbo Frames set for both)
- Select the NICs for the MPIO
- Select the Virtual IP Adresses to be used with the MPIO
- Start the Auto Failover service
- Check the iSCSI initiator settings and set the MPIO functions
in Other
- Konfiguration des Open-E DSS V6 iSCSI-Failover
- Verbindung mit iSCSI Storage in ESXi 5.0
- Demo: Toleranz von Open-E DSS V6 iSCSI-Failover bei Stromausfall am primären Server
- Demo: Toleranz von Open-E DSS V6 iSCSI-Failover bei IO-Fehlern
- Verbindung zwischen einem Open-E DSS V6 Node und einem Cluster nach komplettem RAID-Ausfall
in Other
- Configure the Fiber Channel HBA for Target Mode with the Qlogic
- Create the Fiber Channel volume
- Setup the Alias and WWN for the Fiber Channel HBA
- Assign the Alias to the Fiber Channel Group
- Verify the Fiber Channnel connection with XEN
- Setup the Multipath in the XEN server
in Other
- Setup the NAS Logical volumes on both Open-E DSS V6 servers
- Create the Snapshot and assign to the Souce NAS Logical Volume
- Enable the Data Replication feature on both Open-E DSS V6 servers
- Configure the Router to use Port 873
- Perform the Data Replication function
